1. Announcing Mekorama on the Web!

    Now anyone can play levels from the forum online, with one click!

    Dismiss Notice
  2. Psst! If you're new here, welcome! Please visit these pages first for information about the forum and Mekorama:

    Welcome! ¡Bienvenido! Selamat datang! Добро пожаловать! Willkommen!
    and
    Everything you want to know about Mekorama

    Dismiss Notice
HaseebDemon

Tiny Towers

A logic/puzzle level. P.S : Its winable but i got lucky too Play and rate

Tiny Towers
HaseebDemon, Feb 26, 2019
    • Rating:
      4/5,
      ridgerunner
      Short but fun. I found two separate ways to get B across to the win.
    • HaseebDemon
      @ridgerunner In which ways you finished them. can you explain?

      I would love to see different ways to complete my levels:thumbsup:

      Btw Thanks For Rating. Also Playing
    • Rating:
      4/5,
      GFJ
      I needed too much luck and patience to get B to the win. It would have been an excellent level if I would have been able to control the Zs.
    • Rating:
      4/5,
      gmacpro
      Levels shouldn't require luck as per your description may indicate. The level was slow as P needed to go so far and then after 5 attempts to drop P, needed a get into a different pattern and dropped P finally. Getting on a moving P sideways can also be difficult but at least you provided 6 dismount spots as B needed to spin to get off. I just realized you said 'logic' but wasn't that a trick to make the Zs fall?
    • ridgerunner
      @HaseebDemon ..two finishes.
      Firstly , probably the designed one; push P into ditch and have B in the starting position of P and B steps onto P when P walks round then both walk to the win and B steps off onto winblock . Secondly, when push P into ditch , hold the draggable so P falls slowly, allowing the head of P to be tapped and B will autopilot over the fallen P and land on the grass alowing B to walk alone to win.
    • HaseebDemon
      @ridgerunner Thanks for the explanations. Im thinking which draggable your talking about? The left side one which slow down the motor?
    • HaseebDemon
      @gmacpro As far as im getting it that your telling about a trick to make Z's fall? I dont know the trick aur maybe i didnt used it. And im getting that your talking about to make P fall onto water with different pattern. Idk what are you talking about. But yes sometime P will go in different directions if your not aware of it.

      Im Excited to know about Zs fall trick.
    • HaseebDemon
      @GFJ Yeah i tried to create some objects to control Z but i was failing or the created objects are becoming blockage of the B path So. I removed them didnt try to make new. Because you can still win. Just need to be aware of them.
    • HaseebDemon
      Come to the start point upper dragable of motor then autopilot and let B fall onto motor still on motor then Use Z's and P direct them towards starting position of B after them Again autopilot come to the starting position while 2 Z's are infront of P and your are behind of P Let P fall onto the windmill then to the water theb directly run coz the Z's are free now can zap you then come to the starting path of p step onto P then to the win as P turns (Note: The other 2 Z's are on starting point Of B ) they are on the level. @gmacpro as your a pro. So im waiting for the trick as you said earlier ☺:thumbsup:

      Also i think that @ridgerunner you made Z's fall of to the level because if you hold the draggable P might fall slowly but Z's can come to zap you because P was a blockage for them while your holding the draggable you cant move and theres no blockage for Z
    • gmacpro
      @HaseebDemon - Here's the Z fall trick.
      I assume you did it differently, if so please advise how you did it.

      As for my P comment, I meant, the timing was off and P was never going to step on the spinning machine so I needed to let P out and retry with different timing.
    • gmacpro
      @HaseebDemon - I read your way and I don't see these 2 auto pilots that you are talking about - can you reexplain or do a movie?
    • HaseebDemon
      @gmacpro Nice and thanks for the video. Yes i provided my way check it out.

      P can step onto spinning machine Theres a small area where B is standing after the level start if you block the back way P will either step into spinning machine or either to the small area from where P is on the way on spinning machine
    • HaseebDemon
      @gmacpro I'll do it in my way i'll upload a video wait for it. Coz i didnt use the fall trick so
    • gmacpro
      @HaseebDemon - Assuming one requires 2 auto pilots then maybe you should change your description from 'logic' as auto pilot isn't logic.
    • HaseebDemon
      @gmacpro The auto pilot is used just to remove B from the path of Z's and P

      Same trick which you used to make Z's fall i used it with B like doing autopilot and holding the slider because didnt wanted B to fall on spinning machine but on the motor so B slowly Comes down to the first floor ground floor of other tower (Just to remove the B from the path as i dont know about the fall Zs trick)

      Then just direct them to the B starting point Now B is safe. Now your behind other bots but now theres a slider on ground floor where bots are in starting of level bots

      The slider is touching the ground you have to autopilot to get your B top on then go and block way of P from back and Z's are blocking from front P will step onto machine fall of to water. Now run else Z will come back to zap you and step to the P and win


      Sorry internet is way too slow taking to much time to upload i'll upload it after some time then
    There are no comments to display.
  • Album:
    HaseebDemon Levels
    Uploaded By:
    HaseebDemon
    Date:
    Feb 26, 2019
    View Count:
    1,536
    Comment Count:
    20

    EXIF Data

    File Size:
    116.7 KB
    Mime Type:
    image/jpeg
    Width:
    591px
    Height:
    850px
     

    Note: EXIF data is stored on valid file types when a photo is uploaded. The photo may have been manipulated since upload (rotated, flipped, cropped etc).